Toll Free: 1-800-565-5007 | Email: sales@craigattachments.com | Craig Portal: portal.craigattachments.com

Available for all makes and models of hydraulic hammers and plate compactors.

  • Available in Wedge Lock, Pin-on, S Series, or Manual Bar Lock lugging

The Craig Convertible Wedge Lock Coupler features a light weight, low profile design that maintains your machines OEM tip radius while offering a quick coupling system. Available as either a hydraulic or manual coupler, both configurations share the same chassis allowing them to be easily switched to either configuration at any time with a Craig supplied kit.

  • Offers a solid, safe and secure hook-up – self adjusts for coupler wear
  • Works with all Craig Wedge Lock lugging for the same weight class
  • Manual configuration features a lock plate to keep bolts from turning out
  • Double redundant safety pins to ensure attachment remains in place in the event of hydraulic pressure loss on hydraulic configuration
  • Converts from Manual to Hydraulic in minutes
  • Hydraulic circuit required on machine stick to operate hydraulic configuration
  • Optional safe working load rated lift eye available

We have taken our proven convertible wedge lock coupler and made it ISO13031 compliant. It continues to provide a light weight, low profile design that maintains your machines OEM tip radius while offering a quick coupling system so you can switch between attachments without having to leave the cab. The coupler has an automatic safety lock that ensures continual engagement even in the event of loss of hydraulic pressure.

  • Offers a solid, safe and secure hook-up
  • Self adjusts for coupler wear
  • ISO 13031:2016 compliant coupler design when sold with a Craig “fully independent coupler kit” (hydraulic lines and control valve run back to engine compartment and hydrauilc tank.)
  • Optional safe working load rated lift eye available
  • Visual locking indicator to identify attachment is engaged
  • Automatic safety locks, does not require safety pins to be inserted after engaging attachment.
  • Coupler can be converted back to a manual version if needed (optional manual kit required).
  • Made in North America

The Craig TrueGrip pin grabber has a simple and reliable design. It features 2 independent locks and has visual safety indicators that allow the operator to ensure both the front locking knuckle and rear latch are engaged. Works with most OEM Coupler Kits (confirm with Craig) or can be supplied with a Craig hydraulic kit.

  • Attachments can be picked up in forward and reverse orientations
  • Features a multi-pin design to pickup attachments from most OEMs in the same machine category
  • Minimal moving parts —single cylinder design that requires no greasing
  • Includes one set of non-hardened attachment pins
  • Uses two line coupler kit system
  • Coupler is designed with machine specific hookup - no loss in attachment rotation
  • Dual independent locks to ensure attachment is retained even if the coupler loses hydraulic pressure
  • ISO 13031:2016, EN 474, and AS 4772 COMPLIANT coupler design (see hydraulic kit options below)
  • Complete with rated lifting point installed
  • Patented design
  • Made in North America

With a simple and reliable design, the Truegrip Tilt coupler combines angled cylinders and the truegrip coupler to make your current bucket a tilt bucket. The cylinders allow the operator to tilt the attachment up to 45 degrees side to side. The coupler is multi pin compatible and the 2 locks attach quickly and are visible from the cab. The pin grabber works with most OEM coupler kits (confirm with Craig) or can be supplied with a Craig hydraulic kit.

  • Attachments can be picked up in forward and reverse orientations
  • Features a multi-pin design to pickup attachments from most OEMs in the same machine category
  • Minimal moving parts – the locking mechanism uses a single cylinder design that requires no greasing
  • Includes one set of non-hardened attachment pins
  • Uses two line coupler kit system
  • Dual independent locks to ensure attachment is retained even if the coupler loses hydraulic pressure
  • Uses tilt cylinders which lowers build height and saves on loss of breakout force
  • ISO 13031:2016, EN 474, and AS 4772 COMPLIANT coupler design (see hydraulic kit options below)
  • Complete with rated lifting point installed
  • Made in North America

The demand for productivity is constantly rising and in some applications the need for work tool changes is almost continuous. With Steelwrist SQ-technology you will be able to change between tiltrotator, hydraulic breaker, crusher, shear, pulverizer, grapple, screening bucket, compactor and of course any mechanical work tool – all without ever leaving the cabin and in only seconds.

  • Features front pin locking technology to keep attachments secure while changing
  • Compact and steel casted symmetrical design
  • Compliant with industry safety standards

The Steelwrist tilt coupler is a combination between a robust tilt motor and the patented Front Pin Lock technology from Steelwrist. With the Steelwrist tilt coupler you will get a safe quick coupler solution when you just need the tilt function and not the full blown tiltrotator functionality. The Steelwrist tilt coupler is based on the steel casted coupler as well as the robust direct fit top with expander pins.

The Steelwrist tiltrotator is designed to deliver the power and durability that is a must for mid-sized and larger excavators. Our tiltrotators have a low building height, high tilt angle and an unbeatable relationship between strength and weight thanks to steel casted components. The tiltrotator enables you to rotate your work tool 360 degrees and tilt 45 degrees in each direction with top of the class precision and controllability. This facilitates your work and makes you flexible to take on a variety of challenging new jobs. The coupler has Front Pin Lock safety solution, a mechanical lock of the front shaft which significantly limits the risk of an unintended drop of work tools.

  • Cast steel in all major components for the best ratio strength to weight
  • The lowest building height
  • 45 degree tilt angle for greater flexibility – on all tiltrotators
  • Double acting tilt cylinders with check valve as option
  • Vertical tilt cylinders that allow digging in narrow trenches
  • Grease lubrication for longer life and possible to connect to your central lubrication system
  • Six channel swivel with high flow for a flexible use with your tiltrotator
Proudly in association with

This website uses cookies to ensure you get the best experience on our website. We also use these cookies to track interactions on our website. Check out our Privacy Policy for more information.

/