Toll Free: 1-800-565-5007 | Email: sales@craigattachments.com | Craig Portal: portal.craigattachments.com

The Craig Brush Rake is a medium duty brush rake designed for efficient moving and sorting of brush on the job site. The profile of the rake is optimized for working with brush and other loose material. For stumping applications Craig recommends the Craig Stump Shear or the Craig Land Clearing Rake.

  • 4, 5, 6 and 7 tooth configurations available in up to 101″ widths – depending on machine size
  • Available in Wedge Lock, Pin-on, S Series or Manual Bar Lock lugging
  • Various ground engaging tools available to meet your specifications
  • Pin-on hook-ups are align bored to OEM tolerances

Ideal for the multi-tool excavator. The Craig Contractor Grapple has been developed to offer the versatility of a grapple to excavator operators running a coupler or a pin grabber. The claws pivot on an independent pin allowing for a full range of motion. Solid boxed construction makes this grapple a great addition to your toolbox.

  • Available in 2-over-3, 3-over-4 and 4-over-5 configurations
  • Three hole bracket mounts strut to stick for variable grapple openings
  • Available in Wedge Lock, Pin-on, S Series or Manual Bar Lock lugging
  • Optional hydraulic cylinder to replace strut available
  • Optional wear plates and hardfacing available
  • Pin-on hook-ups are align bored to OEM tolerances
  • Heavy duty shared-pin option available. Offers more clamping power for dedicated demolition machines

Perfect for loading, unloading, placing, and cleaning mats, the Craig Excavator Rotating Mat Grapple is the ideal tool to increase productivity and enhance matting capabilities. Features dual high torque motors for continuous 360° rotation and a low profile cylinder design that allows for greater opening capability and added stability over the competition.

  • Two grapple sizes available capable for carrying 8’ wide mats
  • 120 – 150 class grapple capable of carrying two mats (~5,000 lbs*)
  • 200 – 300 class grapple capable of carrying four mats (~10,000 lbs*)
  • Extra wide opening
  • Low profile design for added stability
  • Available in 2 clamp configurations – paddle and rake or two paddles
  • Dual bushings at all pivot points with grease fittings
  • Torque tube design and AR 100 plate construction in rake and paddle
  • * Max capacity subject to machine capability

An ultra low profile design, the Craig Excavator Pipe Grapple is the best tool for loading and unloading pipe at the job site. Offering great visibility for added safety and dual reinforced top clamps, the Craig Excavator Pipe Grapple is a top performer whether you’re moving a single pipe or filling the grapple to capacity.

  • Available in Wedge Lock, Pin-on, S Series, or Manual Bar Lock lugging
  • Optional bolt-on lugging available for the best in machine versatility
  • Simple chain tine adjustment

The Craig stumper is the ultimate tool for stump removal and land clearing applications. Complete with a dual shank design to remove stumps with a minimal disturbance to the soil. Minimal soil disturbance improves land clearing efficiency by reducing filing and grading.

  • Comes complete with heel hooks on both shanks as well as a serrated center plate for cutting lateral roots
  • Compatable with Craig Mechanical and Hydraulic thumbs
  • Available with a variety of pin on, wedge lock or S style lugs installed
  • Available with serrated tines for improved material retention and gripping force or smooth champered tines for improved ground penetration and cutting ability
  • Comes with either two AR400 shanks or customer specified replaceable GET installed

Our signature thumb – the Craig Direct Link Hydraulic Thumb, features a four tooth inter-meshing design and boxed frame. This thumb provides superior grip and dexterity for day-in and day-out material handling.

  • Up to 120° of gripping rotation
  • Inter-meshes with bucket teeth
  • Installation and hydraulic kits available
  • Tucks close to the stick when not in use for great visibility
  • Custom configurations available upon request

For forestry, site preparation and demolition – the Craig Land Clearing Rake works to quickly sort and clear large piles of debris with ease.

  • 4, 5, 6 and 7 tooth configurations available in up to 101″ widths – depending on machine size
  • Unique rake profile makes it the ideal tool for stumping and loading
  • Available in Wedge Lock, Pin-on, S Series or Manual Bar Lock lugging
  • Various ground engaging tools available to meet your specifications
  • Pin-on hook-ups are align bored to OEM tolerances

The Craig land clearing rake series 2 combines a rake and a thumb into an all in one attachment that excels at tough forestry applications that require picking, sorting, and shaking free non fibrous debris during land clearing and grubbing applications. A helac rotator is used to operate the thumb and provides a strong and constant grip on material in the rake through the rake’s rotation. The helac rotator has no exposed shafts and is sealed for a long service life.

  • Easily transfers between machines within the same class and hookup with no welding required.
  • This attachment requires one free hydraulic circuit to operate that has two way flow.
  • Jumper hoses are not supplied.
  • Choice of lugging
  • Choice of GET brand

When you need the ultimate in maneuverability, look no further than the Craig Progressive Link Hydraulic Thumb. Delivering up to 180° of constant gripping power throughout virtually the entire rotation of the bucket.

  • Up to 180° of gripping rotation
  • Inter-meshes with bucket teeth
  • Tucks close to the stick when not in use for great visibility
  • Custom configurations available upon request

The Craig Universal Pad Mount Thumb is the perfect stocked solution for outfitting machines with a durable, easily installed, fully hydraulic thumb that is customizable to the specific tip radius of each machine. When not in use the thumb tucks up close to the stick for unparalleled visibility and convenience.

  • Fits almost all excavators from 10 to 25 ton (10′ stick or longer)
  • Easy installation, hydraulic kits available
  • Tucks close to the stick when not in use for great visibility
  • Rubber stop and lock keep thumb tight to the stick when not in use
  • Additional valve required on machine

More than just a frost tooth, the Craig Ripper Tooth is designed for extra heavy duty applications where other rippers fail. Engineered for maximum penetration, the double reinforced shank joins a gusseted, boxed, lugging plate for unparalleled strength.

  • Available in Wedge Lock, Pin-on, S Series or Manual Bar Lock lugging
  • Various ground engaging tools available to meet your specifications
  • Pin-on hook-ups are align bored to OEM tolerances

The Craig Stick Mount Thumb is the perfect solution for outfitting machines with a durable and easily installed thumb. When not in use the thumb tucks up close to the stick for unparalleled visibility and convenience.

  • Universal fit (May not mesh with all bucket teeth, contact Craig for details)
  • Features up to 120 degrees of rotation
  • Stick mount design allows the installer to customize the thumb hang down and rotation by adjusting pad location on the excavator stick
  • Middle tines are shortened to help prevent interference with excavator boom
  • Rugged and durable design for years of trouble free operation
  • Includes manual thumb lock to store thumb tight to the stick
  • Additional valve required on machine to operate thumb

Utilizing a unique design with bolt-on cheek plates and replaceable edges, the Craig Excavator Snow Blade is the ideal dozer style blade for your excavator to clear snow from the work site.

  • Available in Wedge Lock, Pin-on, S Series, or Manual Bar Lock lugging
  • Bolt-on cheek plates standard
  • Cutting edge is reversible and replaceable

Developed specifically for work in established blueberry fields that are converting to mechanized harvesting. Operators use the shallow cutting edge to pierce the ground and smooth soil underneath established plants with minimal impact on the plants and surrounding area.

  • Available in Wedge Lock, Pin-on, S Series or Manual Bar Lock lugging
  • Various widths and tooth configurations available
  • Various ground engaging tools available to meet your specifications
  • Pin-on hook-ups are align bored to OEM tolerances

The 4-in-1 Bite Bucket is a versatile tool combining all the best aspects of a standard dig bucket, clam grapple, ditch bucket and chuck blade. With this one attachment you can minimize the need for additional machines on the job site. Dig like a standard bucket, move materials securely, grade the finished piece with the straight cutting edge, skim ground cover with the serrated reverse clam edge or securely grab a piece of I-beam to smooth large areas all at once. This bucket is also great for accurately spreading aggregate into trenches by using the bucket as a belly dump.

  • Superior Brinell 400 steel is used in all wear areas
  • Available in Wedge Lock, S Series or Manual Bar Lock lugging
  • Various ground engaging tools available to meet your specifications
  • Pin-on hook-ups are align bored to OEM tolerances
Proudly in association with

This website uses cookies to ensure you get the best experience on our website. We also use these cookies to track interactions on our website. Check out our Privacy Policy for more information.