Toll Free: 1-800-565-5007 | Email: sales@craigattachments.com | Craig Portal: portal.craigattachments.com

The 4-in-1 Bite Bucket is a versatile tool combining all the best aspects of a standard dig bucket, clam grapple, ditch bucket and chuck blade. With this one attachment you can minimize the need for additional machines on the job site. Dig like a standard bucket, move materials securely, grade the finished piece with the straight cutting edge, skim ground cover with the serrated reverse clam edge or securely grab a piece of I-beam to smooth large areas all at once. This bucket is also great for accurately spreading aggregate into trenches by using the bucket as a belly dump.

  • Superior Brinell 400 steel is used in all wear areas
  • Available in Wedge Lock, S Series or Manual Bar Lock lugging
  • Various ground engaging tools available to meet your specifications
  • Pin-on hook-ups are align bored to OEM tolerances

An excavator grapple and dig bucket all-in-one, the Craig Grab Bucket is the perfect tool for land clearing and demolition jobsites. Features dual thumb cylinders on the bucket for greater gripping force that follows the bucket throughout the entire curl cycle. The thumb is mounted directly to the bucket giving you superior machine versatility by allowing you to drop the entire thumb and bucket assembly as one piece.

  • Available in Wedge Lock, Pin-on, S Series, or Manual Bar Lock lugging
  • Pin-on hook-ups are align bored to OEM tolerances
  • Various ground engaging tools available to meet your specifications
  • Thumb and bucket teeth inter-mesh
  • NOT AVAILABLE IN THE U.S.A

The Craig Grab Bucket 2 is our newest version of our Craig Grab Bucket. The most exciting feature is the helical actuator that replaces standard cylinders, making the attachment more reliable and stronger than ever. The Helical Actuator can produce up to 54,000 foot-pounds of torque at 3000 PSI. This means a continuous grip throughout the bucket’s rotation. The thumb is directly mounted on the bucket, you can drop the entire attachment in one piece. This design uses Hardox 400 plate which allows for longer wearability and service life.

  • Built with a helic actuator to provide a steady grip with no exposed cylinder shafts
  • Pin-on hook-ups are align bored to OEM tolerances
  • Various GET brands available to meet your specifications
  • Thumb and bucket teeth inter-mesh
  • Install is easy with no welding required
  • Switch between machinery quickly for maximum productivity of your fleet
  • AR 400 construction designed to provide a long service life
  • Perfect for picking, sorting, and transferring material

Tear through frozen ground and trench at the same time to cut your digging time in the winter in half with the Craig Frost Bucket. Adco style teeth standard for superior ground penetration.

  • Available in Wedge Lock, Pin-on, S Series, or Manual Bar Lock lugging
  • Option Hard-Facing available
  • Pin-on hook-ups are align bored to OEM tolerances
  • Enclosed lift ring standard

Craig excavator buckets are designed and built to meet your specifications. Superior quenched and tempered Brinell 400 steel is used in all wear areas.

  • Available in Wedge Lock, Pin-on, S Series, or Manual Bar Lock lugging
  • Comes pre-drilled for side cutters or wear shrouds
  • Optional Hard-Facing available
  • Various ground engaging tools available to meet your specifications
  • Pin-on hook-ups are align bored to OEM tolerances
  • Enclosed lift ring standard

The Craig Integrated Thumb Trenching Bucket is based on our Direct Link Hydraulic Thumb (EX-CUT) and Heavy Duty Trenching Bucket (EXB-HD). Hanging the thumb from the bucket rather than the stick pin allows the excavator to completely free itself from the bucket and thumb in just seconds. The thumb cylinder is intended to be removed from the excavator stick, allowing for maximum operator visibility when using other attachments.

  • Available in Wedge Lock lugging only
  • Comes pre-drilled for side cutters or wear shrouds
  • Various ground engaging tools available to meet your specifications
  • Enclosed lift ring standard
  • Thumb has up to 120° of gripping rotation
  • Thumb and bucket teeth inter-mesh

With its low profile design, curved cheek plates and active attack angle, the Craig Quik Fill bucket is designed to minimize surface friction and maximize cycle time efficiency when loading and unloading the bucket.

The lengthened shell floor promotes smooth loading and unloading with minimal wasted movement. Instead of using breakout force to fill the bucket by curling the attachment, the Quik Fill bucket is designed to be pulled towards the machine – shaving material into the bucket in a smooth motion. This motion eliminates partial fills and excess spillage while also leaving the bucket closer to the open position to allow quicker dumping of the material.

  • Available in Wedge Lock, Pin-on, S Series, or Manual Bar Lock lugging
  • Longer hooks for easier alignment
  • Quik Fill option available for HD, XHD and SS class buckets

Craig offers all digging buckets with the option of low pin lugging. Used exclusively on machines equipped with pin grabbers. Recessed pins decrease tip radius for added breakout force over conventional full height lugs.

  • Available on Quik Fill and Standard profile buckets
  • Pin bosses are align bored to OEM tolerances

The ultimate trenching bucket for excavators working in the most extreme applications. The Craig Mega Armour Severe Service Trenching Bucket features extensive plating and wear components in key areas to reduce wear in high abrasion, high impact job sites.

  • Top and bottom sidebar protectors are interchangeable to improve wear life
  • Designed to protect the edges of the three piece runners
  • Protects key area where the base edge is welded to the side cutter
  • Internal Weldox 100 beams reinforce the bridge section of the bucket
  • Designed to protect from base edge scalloping
  • Key wear areas made of Hardox 450 for increased life and durability

The excavator sand bucket has a scoop shape with a flat bottom to sit on the ground for easy attachment while the shape is perfect for scooping materials like sand and fine gravel.

  • Reduced surface area and lack of GET allows for easy penetration through for soils
  • Flat BTM design allows for detailed grading during pipe laying operators
  • Open top prevents soils from “air locking” and suctioning to inside of bucket
  • Bolt on edge (optional)

The Craig Skeleton Rock Bucket is designed for separating rocks and other large materials from loose soil. The SR bucket for excavators is made of durable steel to last tough applications. Slots sift loose material to separate rocks.

  • Bucket ribs are made of high abrasion steel for added strength and durability.
  • Designed to sift dirt, gravel, and debris
  • Bottom of bucket features AR 400 wear plate runners and choice of GET
  • A range of custom opening/spacing of the bucket ribs are available to suit debris sorting

Craig Severe Service Buckets are specifically designed to meet your toughest applications. Superior 400 Brinell quenched and tempered steel is used in the mainsheet, end-plates, horizontal wear bars and base edge.

  • Available in Wedge Lock, Pin-on, S Series, or Manual Bar Lock lugging
  • Comes pre-drilled for side cutters or wear shrouds
  • Optional Hard-Facing available
  • Various ground engaging tools available to meet your specifications
  • Pin-on hook-ups are align bored to OEM tolerances
  • Enclosed lift ring standard

The v-shape trench bucket is the perfect bucket for pipe laying in rocky/fractured ground conditions. The v-shape of the bucket also reduces the amount of bedding material that will be required in the trench thus reducing the cost to install pipe. All teeth engage the ground at the same time which leaves a smooth trench bottom.

  • Available in Wedge Lock, Pin-on, S Series, or Manual Bar Lock lugging
  • Complete with Adco style GET

Extra Heavy Duty Buckets feature thicker G40 steel throughout their construction – including thicker Brinell 400 wear plate on the runners and side front plate.

  • Available in Wedge Lock, Pin-on, S Series, or Manual Bar Lock lugging
  • Comes pre-drilled for side cutters or wear shrouds
  • Optional Hard-Facing available
  • Various ground engaging tools available to meet your specifications
  • Pin-on hook-ups are align bored to OEM tolerances
  • Enclosed lift ring standard
Proudly in association with

This website uses cookies to ensure you get the best experience on our website. We also use these cookies to track interactions on our website. Check out our Privacy Policy for more information.