The Craig Champion Style Dozer Blade uses a time proven design that offers a rugged hook-up with two stabilizing arms, down pressure strut, and end gates to stop material from flowing out over the edges of the moldboard.

• Reversible replaceable steel cutting edge
• Extra thick moldboard eliminates moldboard flex and ensures long wear life
• Reinforced lower mounting bracket
• Moldboard end gates to move more material faster
• Four pitch adjustment positions
• Works with Champion style and Craig Universal plow harness

Available in 10 to 12 foot blades depending on machine size. This Manual Angling Dozer Blade offers 30° of angle in both directions for maximum versatility. 851 Series Dozer Blades require a QKMG Parallel Lift Harness.

• Reversible replaceable steel cutting edge
• Extra thick moldboard eliminates moldboard flex and ensures long wear life

Specifically designed to work with OEM front mount scarifiers, this 9′ blade slips over the scarifier tool bar and is locked in place using the OEM scarifier teeth.

• Reversible replaceable steel cutting edge
• Extra thick moldboard eliminates moldboard flex and ensures long wear life
• Optional widths available on request
• Adjustable parking legs allow easy attaching and unattaching

Designed to bolt directly to the front head block of the grader, the Craig Front-Mount Scarifier offers a parallel lift design to maintain the scarifier angle at all heights.

• Designed to accept OEM scarifier teeth – not supplied
• Three manual tilt adjustment points
• Frame and arms will also accept a dozer blade
• Requires additional valve section on machine

Designed to break up compacted material to facilitate grading, the Craig Mid-Mount Scarifier¹ is designed to bolt to the OEM mounting locations on the grader. A parallel lift linkage ensures even penetration of all teeth at working depth and the v-style head allows for the efficient breaking up of material.

• Same range of travel as OEM scarifier
• Accepts 11 OEM scarifier teeth (not included)
• Free valve section plumbed to front of grader required (jumper hoses not included)
• Front mounting point not included - push block or approved Craig plow harness required
• Will accommodate front head block attachments

• ^{1. Only available on Deere graders at this time}

Available as fronts, rears or complete sets exclusively on late model CAT, Deere and Volvo motor graders. These super heavy duty steel fenders will stand up to the harshest conditions.

• Easy bolt-on installation. No welding means easy removal during machine service
• Will not interfere with the machine’s functions throughout their full range of motion
• Fender wells are made of 14 gauge steel and include heavy duty rubber mudflaps
• Fenders provide ample clearance for tire chains
• Heavy 1.5" x 1.5" supports
• Integrated step allows access to engine compartments but can also be folded away and secured when not in use
• Allows both left and right cab doors to open fully

The Craig Parallel Quick Hitch Lift Group system allows for maximum work site and seasonal versatility. Change front mount grader attachments in just seconds. Female blanks available for converting existing attachments.

• Up to 28" of lift
• Rugged parallel design maintains blade angle at all heights
• Large contact area spreads the load over a wide surface for strength
• Works with all standard Craig snow plows
• Mechanical locking pins standard (hydraulic pins optional)

A versatile multi-position plow, the Craig Folding Vee Plow is capable of acting as a vee plow, inverted vee plow, straight blade, or angled blade.

• Designed for use with a Craig plow harness
• Rigid strut for applying down pressure
• Only available as a solid edge plow
• Light weight tube frame design
• Option rubber deflector shown - high visibility kit, curb shoes, and a variety of edges available

Mounting to the right side of the factory circle moldboard, the Craig Universal Snow Gate operates hydraulically allowing the operator to momentarily interrupt the flow of snow to avoid filling driveways or intersections. It’s built extra heavy duty to tackle extreme snow and ice. A floating gate runner allows it to operate cleanly on uneven surfaces.

• Weighs 1,275lbs
• 47.5" reversible bolt-on cutting edge
• 26" tall with 1/4" thick moldboard
• Mounts to factory circle moldboard slides

A rugged solution for reclaiming the road shoulder. The Series II Windrow Eliminator features a robust design with a parallel lift system. Eliminates the need for an extra pass, saving time and energy for your operation.

• No need to grade roads twice because of unwanted windrows
• Hydraulic lift provides 12" to 24" of lift (depending on machine), keeping the Windrow Eliminator out of the way when not in use
• Replaceable steel cutting edge
• Four different angle adjustments – up to 45°
• Available with manual or hydraulic adjustable caster wheels
• Can be side shifted up to 36" left or right
• Blade depth adjustment up to 10"
• Curved blade eliminates windrows while offering a secondary grading pass

A rugged solution for reclaiming the road shoulder. The Series III Windrow Eliminator features a robust design with a parallel lift system. Eliminates the need for an extra pass, saving time and energy for your operation.

• No need to grade roads twice because of unwanted windrows
• Hydraulic lift provides 12" to 24" of lift (depending on machine), keeping the Windrow Eliminator out of the way when not in use
• Reversible, replaceable steel cutting edge
• Four different angle adjustments – up to 45°
• Available with manual or hydraulic adjustable caster wheels
• Can be side shifted up to 36" left or right
• Blade depth adjustment up to 10"
• Flat blade design eliminates windrows created by the grader circle moldboard

Everything you liked about our one way plow with the added bonus of being able to plow at higher speeds. The wheels decrease wear and provide stability to the plow.

• High wear wheels
• Tire height is adjustable to suit edge wear
• Features a unique trip that jumps up and back to clear obstacles
• Optional rubber snow deflector
• Available in Craig Quik Key, OEM coupler, push pole, and pin-on configuration