Increase the dump height of your wheel loader with a Craig High Tip Bucket. On most machines you can increase your dump height to the OEM boom pin height allowing for applications such as loading high-side trucks without the need of a ramp.

• Dual cylinder design with cushion valve for smooth operation
• Visibility slots for accurate loading
• Flat bottom design allows easy penetration and loading
• Available in Craig Quik Key, OEM coupler and Pin-on configurations
• Critical wear areas utilize Brinell 400 wear plate
• Drilled to accept dealer specified edge, installed
• Optional third valve required on machine

Protect your wing assembly with this cab resettable hydraulic trip swivel. Replacing the standard bell swivel on the front post, this unit uses hydraulics to allow the moldboard to trip when it strikes an obstacle.

• Proven road tested, light weight design
• Rugged double acting cylinder
• Requires additional valve on machine

Maximize each load, save time and money. Whether you’re loading wood chips, saw dust, peat moss, hog fuel, snow or any other light material you want to load to your machine’s capacity. Our engineers can design to meet any application.

• Visibility slots available upon request
• Bolt-on reversible cutting edge ensures long life
• Available in Craig Quik Key, OEM coupler and Pin-on configurations
• Critical wear areas utilize Brinell 400 wear plate
• Drilled to accept dealer specified edge, installed
• Designed to load effectively and easily
• Can be customized to meet your specific requirements

The Feedlot Bucket features a dual cylinder clamp to allow for large capacities of odd shaped and difficult materials, including round bales, to be handled efficiently and accurately for loading and sorting.

• Dual-cylinder single top clamp standard
• Available with custom clamps for your specific application (pricing will vary)
• Bolt-on reversible cutting edge ensures long life
• Available in Craig Quik Key, OEM coupler and Pin-on configurations
• Critical wear areas utilize Brinell 400 wear plate
• Drilled to accept dealer specified ground engaging tools
• Optional third valve required on machine

Protect your wing assembly with this mechanical trip. Replacing the standard bell swivel on the front post, this unit uses a rubber spring that compresses to allow the moldboard to trip when it strikes an obstacle.

• Adjustable rubber spring
• Requires no hydraulics

The Quik Pik Rear Post Bracket allows the complete push pole assembly, wing, and plow to be disconnected from the loader by a single person without tools in just minutes.

• Can be installed using existing push poles
• No additional hydraulic valve sections or cylinders required
• Package comes complete with all necessary items for installation including hydraulic quick disconnects
• Does not affect the performance of the wing

The Craig Quik Key coupler system allows for maximum work site and seasonal versatility. Change attachments in just seconds. Purchase our female blank to add to existing attachments or other heavy job site items that need to be moved frequently.

• Single point self aligning pickup centers the coupler easily, even on uneven terrain
• Large contact area spreads the load over a wide surface for strength
• Works with all Craig Quik Key attachments built for machines within the same size category
• Hardened steel wrist pin pressed into lock pin allows up to 10° of movement to improve alignment and connection strength as coupler parts wear
• Pin assembly is available with grease fittings

Bucket lift hooks can be dangerous, they’re also inefficient. Reach further, more accurately and with better visibility by using the Craig Crane Boom. Available in 2-section or 3-section configurations, a crane boom increases the reach and material handling capabilities of any wheel loader.

• Hydraulic extension available upon request
• Available 3-section extension for increased reach
• Available in Craig Quik Key, OEM coupler and Pin-on configurations

Built to withstand harsh environments and severe service, Heavy Duty Rock Buckets are reinforced with extra thick plate and Brinell 400 wear protection on all wear surfaces. Straight, semi-spade and full spade edges available with your choice of teeth and segments. Features a plate style spill guard.

• Available with custom hardfacing for your specific application (pricing will vary)
• Can be configured with various arrow head cutting edges upon request
• Critical wear areas utilize Brinell 400 wear plate
• Drilled to accept dealer specified ground engaging tools

Built specifically for airport installations, Craig Ramp Plows are keeping airport ramps clear and safe around North America. Custom engineered for ease of use and efficient snow handling, these extra-wide plows can be ordered with a variety of cutting edges – including rubber to protect the tarmac.

• Replaceable, adjustable wear shoes and cutting edge for long wear life
• Optional swing-out removable end gates
• Can be ordered in a wide range of widths upon request
• Available in Craig Quik Key, OEM coupler and Pin-on configurations

The Craig Extendable Reversible Plow is ideal for contractors who plow large parking lots and yards. The hydraulically adjustable width allows it to be an efficient snow removal tool with a wide cleared path that is safe for travel between jobs.

• Universal vertical down pressure float hook-up frame - can be locked out for scraping applications
• Available in Craig Quik Key, OEM coupler, and pin-on configurations
• Up to 30° of left and right angling capability - even when extended
• Trip edge or trip moldboard available
• Extensions slide on rugged tube frame
• Optional third valve required on machine
• Option rubber deflector and high visibility kit available
• Comes standard as 10' wide with capability to extend to 16'
• Comes with double selector valve on the plow as well as a control switch

A rugged snow removal solution for your wheel loader, the Craig High Sierra Reversible Plow is designed with heavy duty snow removal applications in mind. Features a rugged boxed back frame and additional gusseting along the base angle for improved strength in tough plowing conditions.

• Universal vertical down pressure float hook-up frame - can be locked out for scraping applications
• Adjustable, replaceable skid shoes
• Up to 30° of left and right angling capability
• Rugged 4" cylinders with a wide stance for greater holding strength
• Available in Craig Quik Key, OEM coupler, and pin-on configurations
• 45" tall moldboard with a 1/4" thick moldboard sheet
• Tall steel cutting edges for longer wear life
• Rigid design with no trip
• Optional rubber deflector, high visibility kit, and curb shoes available
• Optional third valve required on machine

A versatile multi-position plow, the Craig Folding Vee Plow is capable of acting as a vee plow, inverted vee plow, straight blade, or angled blade.

• Universal vertical down pressure float hook-up frame - can be locked out for scraping applications
• Available in Craig Quik Key, OEM coupler, and pin-on configurations
• Only available as a trip edge plow
• Light weight tube frame design
• Optional third valve required on machine
• Option rubber deflector shown - high visibility kit, curb shoes, and a variety of edges available

Working in tight quarters? The Craig Side Dump Bucket is for you. Designed to work safely with your specific machine, the Side Dump Bucket allows conventional loading and lateral unloading for material. Simply pull up beside the truck or trench and dump the bucket sideways hydraulically. Eliminates excess loader travel and lost time.

• Boxed back frame offers superior strength and rigidity
• Equipped with rugged 5" cushion head cylinder
• Bolt-on reversible cutting edges
• Available in Craig Quik Key, OEM coupler and Pin-on configurations
• Available in left hand dump (standard) or right hand dump (optional)
• Mechanical side dump lock mechanism standard. Optional hydraulic lock mechanism available
• Optional third valve required on machine
• Critical wear areas utilize Brinell 400 wear plate
• Drilled to accept dealer specified edge, installed

Designed and tested under severe working conditions in the heaviest logging mill applications. This grapple is a time-proven winner for the sorting and moving of tree-length or logs.

• Boxed frame design for superior strength
• Dual cylinders
• Can be customized to your specific needs
• Available in Craig Quik Key, OEM coupler and Pin-on configurations
• Optional third valve required on machine