Toll Free: 1-800-565-5007 | Email: sales@craigattachments.com

With its low profile design, curved cheek plates and active attack angle, the Craig Quik Fill bucket is designed to minimize surface friction and maximize cycle time efficiency when loading and unloading the bucket.

The lengthened shell floor promotes smooth loading and unloading with minimal wasted movement. Instead of using breakout force to fill the bucket by curling the attachment, the Quik Fill bucket is designed to be pulled towards the machine – shaving material into the bucket in a smooth motion. This motion eliminates partial fills and excess spillage while also leaving the bucket closer to the open position to allow quicker dumping of the material.

  • Available in Wedge Lock, Pin-on, S Series, or Manual Bar Lock lugging
  • Longer hooks for easier alignment

Tear through frozen ground and trench at the same time to cut your digging time in the winter in half with the Craig Frost Bucket. Adco style teeth standard for superior ground penetration.

  • Available in Wedge Lock, Pin-on, S Series, or Manual Bar Lock lugging
  • Option Hard-Facing available
  • Pin-on hook-ups are align bored to OEM tolerances
  • Enclosed lift ring standard

The Craig Hydraulic Angling Ditching Bucket has a flat cylinder design to keep the tip radius to a minimum. This design allows for a full 45° of rotation while guarding the cylinders for maximum protection.

  • Work quicker, on proper grade, without moving the machine
  • Main hinge tilt pins are align bored for long life
  • Available in Wedge Lock, Pin-on, S Series, or Manual Bar Lock lugging
  • Comes pre-drilled for bolt-on cutting edge

This heavy-duty version of our Craig Hydraulic Angling Ditching Bucket is the perfect tool for all your ditching, grading, and contouring needs. The Craig Severe Service Hydraulic Angling Ditching bucket features a complete bucket weldment of Brinell 400 steel, Brinell 450 cheek plates, and hardened bushings at all pivot points.

  • 42.5-degree rotation in both directions
  • Available in Wedge Lock, Pin-on, S Series, or Manual Bar Lock lugging
  • Comes pre-drilled for bolt-on cutting edge
  • Available for 8 ton to 40 ton excavators
  • Optional central greasing system available
  • Optional cylinder covers available

Craig excavator buckets are designed and built to meet your specifications. Superior quenched and tempered Brinell 400 steel is used in all wear areas.

  • Available in Wedge Lock, Pin-on, S Series, or Manual Bar Lock lugging
  • Comes pre-drilled for side cutters or wear shrouds
  • Optional Hard-Facing available
  • Various ground engaging tools available to meet your specifications
  • Pin-on hook-ups are align bored to OEM tolerances
  • Enclosed lift ring standard

The Craig Integrated Thumb Trenching Bucket is based on our Direct Link Hydraulic Thumb (EX-CUT) and Heavy Duty Trenching Bucket (EXB-HD). Hanging the thumb from the bucket rather than the stick pin allows the excavator to completely free itself from the bucket and thumb in just seconds. The thumb cylinder is intended to be removed from the excavator stick, allowing for maximum operator visibility when using other attachments.

  • Available in Wedge Lock lugging only
  • Comes pre-drilled for side cutters or wear shrouds
  • Various ground engaging tools available to meet your specifications
  • Enclosed lift ring standard
  • Thumb has up to 120° of gripping rotation
  • Thumb and bucket teeth inter-mesh

With its low profile design, curved cheek plates and active attack angle, the Craig Quik Fill bucket is designed to minimize surface friction and maximize cycle time efficiency when loading and unloading the bucket.

The lengthened shell floor promotes smooth loading and unloading with minimal wasted movement. Instead of using breakout force to fill the bucket by curling the attachment, the Quik Fill bucket is designed to be pulled towards the machine – shaving material into the bucket in a smooth motion. This motion eliminates partial fills and excess spillage while also leaving the bucket closer to the open position to allow quicker dumping of the material.

  • Available in Wedge Lock, Pin-on, S Series, or Manual Bar Lock lugging
  • Longer hooks for easier alignment
  • Quik Fill option available for HD, XHD and SS class buckets

Craig offers all digging buckets with the option of low pin lugging. Used exclusively on machines equipped with pin grabbers. Recessed pins decrease tip radius for added breakout force over conventional full height lugs.

  • Available on Quik Fill and Standard profile buckets
  • Pin bosses are align bored to OEM tolerances

The Craig Hydraulic Rotating Ditching Bucket adds a hydraulic tilt mechanism to an effective ditch cleaning bucket, allowing the operator to change grading angles with ease. Numerous sizes available for 3.5 ton and 5.5 ton machines.

  • Reversible bolt-on cutting edge standard
  • Helac rotator for greater angling ability versus traditional cylinders
  • Up to 90° of side to side rotation

Craig Severe Service Buckets are specifically designed to meet your toughest applications. Superior 400 Brinell quenched and tempered steel is used in the mainsheet, end-plates, horizontal wear bars and base edge.

  • Available in Wedge Lock, Pin-on, S Series, or Manual Bar Lock lugging
  • Comes pre-drilled for side cutters or wear shrouds
  • Optional Hard-Facing available
  • Various ground engaging tools available to meet your specifications
  • Pin-on hook-ups are align bored to OEM tolerances
  • Enclosed lift ring standard

Extra Heavy Duty Buckets feature thicker G40 steel throughout their construction – including thicker Brinell 400 wear plate on the runners and side front plate.

  • Available in Wedge Lock, Pin-on, S Series, or Manual Bar Lock lugging
  • Comes pre-drilled for side cutters or wear shrouds
  • Optional Hard-Facing available
  • Various ground engaging tools available to meet your specifications
  • Pin-on hook-ups are align bored to OEM tolerances
  • Enclosed lift ring standard

Available for all makes and models of hydraulic hammers and plate compactors.

  • Available in Wedge Lock, Pin-on, S Series, or Manual Bar Lock lugging

Featuring an instant quick locking knuckle, the Craig Quik Loc Gen. 2 - powered by Cascade - is the ultimate in excavator pin grabber safety. A unique wedge style design allows the Craig Quik Loc Gen. 2 to be light weight and low profile - meaning more attachment capacity.

  • True multi-pin design allows for use of different OEM attachments (call Craig to verify application)
  • Attachments can be coupled in forward and reverse orientations
  • Self shimming wedge ensures a tight fit every time, even as the attachment pins wear
  • Quick locking safety knuckle secures the attachment instantly in the front jaw
  • Visual safety indicators allow the operator to ensure both the front locking knuckle and wedge are engaged
  • Integrated, rated lift hook included
  • Controls easily integrate into existing interior panels
  • Includes 1 set of non-hardened attachment pins
  • 3 line hydraulic kit comes standard allowing attachments to be removed on the ground
  • Coupler is compliant with ISO13031:2016 - the latest industry safety standard

The Craig Convertible Wedge Lock Coupler features a light weight, low profile design that maintains your machines OEM tip radius while offering a quick coupling system. Available as either a hydraulic or manual coupler, both configurations share the same chassis allowing them to be easily switched to either configuration at any time with a Craig supplied kit.

  • Offers a solid, safe and secure hook-up – self adjusts for coupler wear
  • Works with all Craig Wedge Lock lugging for the same weight class
  • Manual configuration features a lock plate to keep bolts from turning out
  • Double redundant safety pins to ensure attachment remains in place in the event of hydraulic pressure loss on hydraulic configuration
  • Converts from Manual to Hydraulic in minutes
  • Hydraulic circuit required on machine stick to operate hydraulic configuration
  • Optional safe working load rated lift eye available

A true aftermarket S-Style coupler, available from Craig Manufacturing. S1, S2, and S3 styles available to pin onto any excavator. The Craig S-Style Coupler features both audible and visual indicators to let the operator know when the coupler is engaged and disengaged. The low profile design allows for no tip radius extension allowing your machine to maintain maximum breakout force with the convenience of a quick coupling system. Shim kits available to reduce hook-up wear and create a tighter coupler fit when used with older attachments.

  • Available in S1, S2, and S3 coupler variations
  • Rated lift hooks come standard
  • Cylinder and hoses protected by removable plate
  • Audible and visual safety indicators
  • Coupler kit included with in-cab controls and all hydraulic lines (machine specific)
  • Shim kits available from Craig
Proudly in association with

This website uses cookies to ensure you get the best experience on our website. We also use these cookies to track interactions on our website. Check out our Privacy Policy for more information.